<<TOP

Products

Overseas Partners

Single Screw Extruder

IKG Single Screw Extruder is suitable for precise and stable extrusion of wide range of materials, from general use to super engineering plastics.
Adding optional items will achieve the low temperature, stable, high output extrusion. Tailor made screw is available for requested screw design.

DDS Series Extruder

Direct Drive Extruder

No dust/No vibration/Low noise caused by drive belt

Compact design: no pulley, no cover

Maintenance free: no more belt change/adjustment

DDS Extruder specification

Item/Type DDS40 DDS50 DDS65 DDS75
L/D 25~32 25~32 25~32 25~32
Motor power(KW) 7.5 11 18.5 22 30 37 37 45
Screw rpm 60 100 60 100 60 100 60 100
Output(Kg/h) Olephin material 10~30 20~60 40~140 60~180

DDV Series Extruder

DDV Series Extruder with Gear Pump System

Direct Dirve Special Ventilation Extruder

No more drying process needed for PET-G, ABS, PMMA, Wooden powder mixed material.

  • ・No dryer/dehumidifier needed.
  • ・Less energy and compact design
  • ・Max. 3 nos of ventilation port will achieve wide range of extrusion without drying process.

DDV Extruder specification

Item/Type DDV40 DDV50 DDV65 DDV75
L/D 32 32 32 32
Motor power(KW) 7.5 11 18.5 22 30 37 37 45
Screw rpm 60 100 60 100 60 100 60 100
Cylinder(Barrel)

Heating

Band type heater
Cooling Air Cooling

PMS Series Extruder

High Performance Single Screw Extruder(Small)

Conventional belt drive type extruder. Optimum design of screw for TPO resin, soft and hard material will achieve excellent performance. Inverter is introduced in the main drive for stable extrusion and easy maintenance.

 

PMS Extruder specification

Item/Type PMS20 PMS25 PMS30 PMS40 PMS50 PMS65 PMS75 PMS80 PMS90
L/D 25~28 25~28 25~28 25~32 25~32 25~32 25~32 25~32 25~32
Motor power(KW) 1.5~2.2 1.5~2.2 2.2~3.7 5.5~15 11~22 22~45 30~75 37~90 45~110
Output
(Kg/h)
(A) 1~3 1~5 5~15 10~30 20~60 40~140 60~180 70~210 80~260
(B) 1~2.5 1~4 5~10 10~25 20~40 40~80 60~110 70~130 80~150

(A) Olephine material
(B) Engineering Plastics

MS series

High performance extruder(Large type).
Cylinder(Barrel) diamter from 100mm to 300mm.

MS Extruder specification

Item/Type MS100 MS115 MS125 MS150 MS180 MS200 MS300
L/D 25~34 25~34 25~34 25~34 25~34 25~34 25~34
Motor power(KW) 75~110 90~110 90~150 100~150 110~170 150~230 170~450
Output(Kg/h) Olephin material 100~300 130~360 140~420 300~500 500~800 700~1,000 1,000~1,800

Option

PAGE TOP